Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakamura, Tatsuya; To, Kentaro; Ebine, Masumi; Birumachi, Atsushi; Sakasai, Kaoru
Proceedings of 2019 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC 2019), Vol.1, p.735 - 736, 2020/08
Times Cited Count：0 Percentile：0.08(Nuclear Science & Technology)A large area, position-sensitive scintillation neutron detector was developed for upgrading the SENJU, time-of-flight Laue single crystal neutron diffractometer, in J-PARC MLF. The detector has a neutron-sensitive area of 512 
512 mm with a pixel size of 4 4 mm. The detector was developed for upgrading of the SENJU instrument. The large area detector is to be installed below the vacuum tank to enlarge a covering solid angle. A 
Li:ZnS (Ag) scintillator and wavelength-shifting fiber technologies are employed. Each fiber channel is read out individually with photon counting mode. The electronics boards are implemented at the backside of the detector, enabling the detector depth as short as 20 cm. The detector exhibited a detection efficiency of 45% for thermal neutron. No degradation in fiber position and in neutron sensitivity has been observed over one year after production. In this paper, detector design and detector performances are presented.
Tanimura, Yoshihiko; Saegusa, Jun; Yoshizawa, Michio; Yoshida, Makoto
Nuclear Instruments and Methods in Physics Research A, 547(2-3), p.592 - 600, 2005/08
Times Cited Count：8 Percentile：52.8(Instruments & Instrumentation)The moderator structure of a neutron spectrometer was optimized with a Monte Carlo code of MCNP-4B. The spectrometer consists of a cylindrical moderator and a position-sensitive thermal neutron detector. It can obtain an energy spectrum from thermal neutron distribution along the cylindrical axis of the moderator. The structure of the moderator was improved by putting a low hydrogen density material in the front of a high hydrogen density one and inserting a neutron absorber which eliminated thermal neutrons diffusing in the moderator. These improvements make energy resolution of the spectrometer better especially for the low energy neutrons from a few tens to 100 keV. The designed spectrometer can be applied to the measurement of energy spectrum over a neutron energy range from a few keV to 20 MeV.
Nakamura, Tatsuya; To, Kentaro; Kawasaki, Takuro; Kiyanagi, Ryoji; Ohara, Takashi; Koizumi, Tomokatsu; Ebine, Masumi; Sakasai, Kaoru
no journal, ,
Position-sensitive scintillation neutron detectors developed using wavelength-shifting (WLS) fiber read out in the Materials and Life Science Experimental Facility of the Japanese Proton Accelerator Research Complex (J-PARC MLF) are briefly reviewed. Several tens of two-dimensional scintillator / WLS fiber detectors have been developed for the single crystal diffractometers. They are implemented to the beam lines of BL03 and BL18. The scintillator / WLS fiber read out technology has many advantages over conventional clear fiber coupled detectors, such as its simple detector structure, flexibility to a pixel size design, and manufacturing cost. In this paper, several examples of the WLS fiber detectors developed at J-PARC MLF are presented together with a recent detector development for the additional detector bank of the BL18. Moreover, a possibility to produce a larger area detector with this technology will be discussed.
